High Quality Welded Wire Mesh Panels 3" x 3" Self Colour Weld Mesh Sheet 4 x 8ft (4.7mm Wire)​

Anping HUILONG began to engage in the wire mesh production industry from 1986, so far it has been 35 years. Making wire mesh products widely used in all walks of life has always been the power and direction of our development and research.

Supplied as full panels or offcut sheets, We can also supply Mesh Frames upon your request.

Wire Diameter: 4.7mm

Hole Size: 3'' x 3''

Width x Length: 4 x 8ft
Wide Range Of Sizes Available as per your request.

Color: Self Color(Bright Silver)

Applications

 Fence Panels

 Pet Runs & Aviaries

 Cages

 Frames

 Gabions

PRODUCT SPECIFICATION

MASS PRODUCTION PROCEDURE

1) Raw Material Preparation

2) Machine Welding

3) Galvanizing(Electro or Hot-dipped)

4) Packaging

5) Container Loading

TECHNICAL INFO

TEST REPORT WIRE TOLERANCE : 土2%

TEST REPORT MESH TOLERANCE: 土5%

TEST REPORT LENGTH TOLERANCE: 土5%

TEST REPORT WIDTH TOLERANCE: 土2%

TEST REPORT WELD TYPE: SPOT WELDING

TEST REPORT WELD STRENGTH: ≥2000N

PRODUCTION STANDARD: AS4687-2007 EN 10244-1-2009 ASTM A 740-1998

APPLICATIONS

Welded Wire Mesh Panels have many obvious characteristics and advantages, so it is widely used in a lot of areas. In addition to as floor heating mesh and animal breeding cage, Welded Wire Mesh Panel is also widely used as a variety of guardrail fencing products. 

By adjusting the wire diameter thickness, mesh size and panel size, Welded Wire Mesh Panel can be made into a variety of different uses of guardrail fencing, such as 358 Mesh Fence, Double wire Mesh Fence, V Mesh Security Fencing, Welded Wire Mesh Gabions, Temporary Fence. Different surface treatment methods bring different visual effects and anti-corrosion properties.
 

PACKAGING AND DELIVERY

1) Wooden Pallet;

2) Iron Pallet;

3) Wooden Box.

Welded Wire Mesh Panels are usually packaged in pallets. The pallet is a cargo platform, or a movable ground, so the goods loaded on the pallet are in a state of readiness that can be transferred into motion at any time. Because of the limitations of its own characteristics, the Welded Wire Mesh Panels need to be supported by pallets, so as to facilitate loading and unloading.

Usually there are two ways to load the pallet, one is wooden pallet, and the other is iron pallet. If the weight of the welded wire mesh panel is very large, then the use of iron pallet is undoubtedly the best choice, because the bearing capacity and compression capacity of iron pallet are much higher than that of wooden pallet. At the same time, we use special design to ensure the belts on the pallets stable and not loose. In addition, wooden boxes are also an alternative way of packing.

FREQUENTLY ASKED QUESTIONS

Q1: Are you a factory or trading company?

We are a 18-year factory and we have registered trading company for sourcing more valuable products for the customers. Therefore, we have both the advantages of factory and trading company. We have our own factory, so we can control the product quality timely and efficiently. At the same time, we also have a professional international trade team, providing good and professional services for customers.

Q2: How to guarantee the quality of products?

We have established the Department of Quality Assurance, every steps from raw material preparation to final product, we have strict quality inspection system to ensure the products meet international standards and satisfy customers. We resolutely put an end to unqualified products flowing into the market. At the same time, we will provide necessary follow-up service assurance. Any problems arising from the cooperation shall be answered within 24 hours and solved within 72 hours.

Q3: What’s the MOQ?

MOQ is 200 pieces for common standardized products; For Customized Products, MOQ should be negotiated in advance. There is no MOQ for sample orders.

HUILONG HISTORY

•  In 1989, HUILONG company was established, the original store was located in Anping Wire Mesh World Supermarket;
•  In 1994, Anping HUILONG wire mesh factory was founded, located in Nanhuan East Road, mainly for the domestic market and produce Welded Wire Mesh Roll, Welded Wire Mesh Panel, and Wire Mesh Fence, etc.;
•  In 1998, ethnic Chinese from Philippines visited us and confirmed the intention of cooperation;
•  In 2004, Philippines invested 1 million funds, HUILONG Wire Mesh became a joint venture company named as "ANPING HUILONG WIRE MESH MANUFACTURE CO., LTD.";
•  In 2008, HUILONG wire mesh international sales department successfully obtained European market, establishing a European trading circle based on France, Belgium and Italy;
•  In 2009, we obtained 50 acres land in Taicheng industry park, and built up a brandnew factory. The workshop occupies 25,000㎡, warehouse 10000㎡, with total 300 sales representatives and workers；
•  In 2011, our company exported to more than one hundred countries, cooperated with more than 200 customers;
•  In May 2012, Shijiazhuang international trade branch office was set up;
•  In 2013, we purchased 300㎡ of office building in Shijiazhuang;
•  In 2015, Anping HUILONG Wire Mesh Manufacture Co., Ltd joined the Anping Wire Mesh Chamber of Commerce, becoming an important part of it;
•  In 2016, we set up a new foreign trade team of 35 people, with an office area of 300 square meters;
•  In 2017-2018, our wire mesh products were well sold and well recognized in the markets of America, Africa and Southeast Asia;
•  In 2019, we registered AIBUER TRADING CO., LTD. and integrated more factory resources, enriched product categories, to provide customers with more valuable services;
•  In 2020, HUILONG invested and established Concertina Razor Wire Factory, which covers an area of 7,000 square meters;
•  In 2021, the factory department has established a domestic trade team of 30 people, with a new office area of 600 square meters.